Posts with tag "biplane"

Avatar

Bee-plane

|
+2


I decided to build a "cartoon plane". Let me represent to your attention "Bee-plane".

Avatar

Fk 12 Comet. Building a styrofoam biplane replica model

|
+2

Avatar

Polikarpov Po-2 - the Heavenly Slug

|
+1
Now that I have crafted a dozen of ceiling tile models, it is about time for me to build a big chugger with a trail of smoke behind it! Without much hesitation I chose a legendary WWII vet – the Polikarpov Po-2. I wanted to be honest, so I decided to build it from wood and cover it with doped fabric and try not to overweight it. Also, I wanted to test my DIY CNC. I hammered at drafts a little, which I had fished out of the web (those were just common views from three angles) and started sawing.


Avatar

My Fly Baby Biplane

|
+0
I’d like to tell you about my copy of Fly Baby. In this article I will describe its construction and my competition with it in detail)

Avatar

Pete n Poke made of ceiling tiles.

|
+0
Hi there! Once I came across the model of a parasol two-sitter «Pete n Poke». It was made of balsa with glow-engine.

I was eager to make it myself but out of ceiling tiles. I decided to cover it with tracing paper on an aqua lacquer base and paint with acrylic spray to make the outline look nicer. It should be noted that I didn't plan to copy it. I simply wanted to make a nice retro model. The motor used was brushless TURNIGY NTM Prop Drive Series 28-36 1200 RPM.
NTM Prop Drive Series 28-26 1100kv / 252w
Product http://www.rcfair.com/en/product/976951/

Wing spread chosen was 1100 mm, fuselage length – 938 mm. I scaled it and changed the drawning due to the usage of ceiling tiles.


Feedback
/ Register
Your country:
Follow a few simple steps to place an order. Mouse over a picture for details.
Deleted items