In this article I’m going to describe how I modified the battery cell circuit for a TGY 5000 6S. Recently, a European Hobbyking retailer sold out these batteries, but they wouldn’t do unmodified, because all my equipment designed for 3S. Another problem was that there were no batteries with capacity that could meet my voltage requirements, and I couldn’t physically or financially afford to buy a whole batch of different ones. Therefore, I decided to buy these batteries and tailor them to my equipment. Please, do not comment on how correct my decision was, let it be on my conscience :))

Well, here is the donor, let's go:

New props have arrived:
GWS Style Slowfly Propeller 9x4.7 Green
Product http://www.rcfair.com/en/product/1082603/
GWS Style Slowfly Propeller 9x4.7 Green
Product http://www.rcfair.com/en/product/1082604/
I'm going to use them instead of the smaller ones, which I have used so far:
8045 SF Props 2pc CW 2 pc CCW Rotation (Orange)
Product http://www.rcfair.com/en/product/510248/
This is the configuration:

Essentially, I had to check them.