I decided to build a "cartoon plane". Let me represent to your attention "Bee-plane".
As usual the design of the aircraft model is the simplest. The materials used are easily accesible and sold in any hardware store. The materials used in the construction of aircraft model: styrofoam ceiling tile thickness-3 mm, color tape, some wooden rulers, bamboo sticks for sushi. The process of building of the model is shown on the photos:

First I drew a diagram of the model showing internal parts.


Parts of the proper size was carefully cutted out from the styrofoam ceiling tile. Parts are glued together by special glue for foam.


For best results, the assembled parts were placed under the load.


The images show the Assembly process. As you can see, everything is simple and clear. If you have any questions write in comments, I will answer you with pleasure.













To enhance the structural strength, the wings was additionally glued with a strip of fiberglass impregnated into epoxy glue.
The production of labels, and the decoration of the airplane model. I used waxed paper and colored adhesive tape to make decals.




The hood. Brushless motor and battery. The ESC is under the battery.


Bottom view. You can see the position of the servos and the receiver.

Bottom view. You can see the position of the servos and the receiver.

Pilot. Model will not fly without the pilot :-)

Take-off weight of the model: 315 grams.

That's such a beautiful, cartoon-like airplane.
After test flight I removed the strip between the wings struts and increased the fin. There was problems with directional stability. Instead of the strip between the wings I put a strut made of bamboo chopsticks for sushi.

Isn't it a beautiful aircraft model?

Photo with me.

Specifications:
Wingspan - 650 mm
Length - 500 mm
Wing chord - 175 mm
Takeoff weight - 315 grams

As usual, the video of the model flight:


During the construction following equipment purchased from this site was used:

Receiver and transmitter set
HobbyKing HK6S 2.4Ghz FHSS 6Ch Tx & Rx (Mode 2)
Product http://www.rcfair.com/en/product/103613/

Servo
HobbyKing™ HK15178 Analog Servo 1.4kg / 0.09sec / 10g
Product http://www.rcfair.com/en/product/103526/

Speed control (ESC)
HobbyKing 12A BlueSeries Brushless Speed Controller
Product http://www.rcfair.com/en/product/100891/

Battery
ZIPPY Compact 1000mAh 2S 25C Lipo Pack
Product http://www.rcfair.com/en/product/401686/
Thank you for your attention
Article wrote: Plaksin Andrew (senior)
Translated from Russian into English: Plaksin Andrew (Jr.)

This is the translated version. You can read the original Russian article here.