Staufenbiel VITESSE V2 3000mm PNP (motor, servos and Multilock built-in)

This product is not available anymore. May be you can find similiar products in the same category (please, follow the link above).

We do not remove such products from the catalogue because customer reviews on them may contain useful information.
Staufenbiel VITESSE V2 3000mm PNP (motor, servos and Multilock built-in)

The Vitesse V2 is out now! The Vitesse V2 has many improvements made for our customers: both sides of the wing are planked with abachi wood. The material has smooth, fine optics with small heat conductivity and a much harder surface. The Vitesse V2 has an new fresh look and easily movable flaps (up).

The Vitesse is an electric extra class glider made by the same manufacturer as the EPSILON . The modell has a painted fiberglass fuselage, with a built in bulkhead for the motor installation. The styrofoam/abachi wing is covered with Oracover and has hinged ailerons and flaps .
The Vitesse is a glider with all-round flight characteristics and a higher speed range. In addition to the good thermal performance the Vitesse V2 has a powerful acceleration and with the brushless-setup the power to shoot up into the sky. You will always be safe whether on the slope or on the fields.

We provide the Vitesse V2 in two versions: ARF and PNP . In this PNP version electrical components (except the ESC) and the multilock-system are included .

    both sides of the wing are planked with abachi wood
    painted fiberglass fuselage
    built-in bulkhead with powerfull 35er HIMAX brushless outrunner
    complete covered, already built-in servos and drivetrain
    1x DS1550 and 5x D260 MG
    Multiplex multilock-system
    wiring harness incl. MPX plugs

The package of this product has over 1.20 m in length, it falls to corresponding surcharges. Specifications: Wingspan approx.: 3000 mm Fuselage length approx.: 1350 mm Weight: 1750 g (empty) Weight (ready to fly): 2900 g Wing area approx.: 65,5 dm² Airfoil: HQ / W - 2,5 / 9 Box contents: Accessories built-in/included: built-in Motor: Himax C3526 - 870kV Servos: DYMOND DS 1550 (1x) , DYMOND D 260 (5x) Accessories: Prop 14x8" RC-Function/accessory recommendation: Elevator: 1x D 260 (incl.) Siderudder: 1x D 1550 (incl.) Aileron: 2x D 260 (incl.) Flaps: 2x D 260 (incl.) Needed to complete: ESC: DYMOND VTX-60 Accessories: 1x 100 cm servo wire for siderudder Batteries: DYMOND LiPo 3200-5000mAh 3S-4S (4S: Prop: 12x6") Charger: DYMOND Powerhouse

Post review

/ Register
Your country:
Follow a few simple steps to place an order. Mouse over a picture for details.
Deleted items