HORIZON E-flite PA-20 Pacer 10e 1300mm ARF


This product is not available anymore. May be you can find similiar products in the same category (please, follow the link above).

We do not remove such products from the catalogue because customer reviews on them may contain useful information.
HORIZON E-flite PA-20 Pacer 10e 1300mm ARF

The PA-20 Pacer was Piper’s answer to the four-seat family airplanes offered by Cessna and Stinson who were capitalizing on the post-war general aviation boom. Eager veterans used their G.I. bill to earn pilot certificates and needed a “family car of the air” for travel that the venerable J-3 Cub used in training simply could not accommodate. The E-flite® PA-20 Pacer 10e ARF airplane replicates the full-scale Pacer for RC pilots who want an iconic scale experience great for hopping out of small fields. Not only does its outline and color scheme closely honor the original, you also get high-end interior appointments, scale looking landing gear, plus optional flaps for greater control at a wider range of speeds. Even more satisfying is the short amount of time you’ll need for this classy lady to be flight-ready.

From the authenticity of its traditional construction to the richness of its UltraCote® finish and high-gloss fiberglass cowling, the E-flite PA-20 Pacer 10e ARF delivers a scale model with outstanding flight characteristics so that you can look like a class-act both in the air and on the ground. The recommended E-flite power system was designed around popular and economical 3S Li-Po batteries to provide great performance for scale maneuvers as well as picture perfect touch-n-gos.

Key Features
    Classic lines and highly accurate scale proportions
    Laser-cut balsa and plywood construction
    Genuine Hangar 9® UltraCote® covering
    Ready-to-mount the E-flite® Power 10 brushless motor
    Pre-painted fiberglass cowl and wheel pants
    Scale cockpit detail (pilot not included)
    Four-channel control with optional flaps
    Two-piece, plug-in wing with carbon fiber wing tube
    Scale wire landing gear assembly
    Large, easy-access belly hatch
Specification: Wingspan approx.: 1300 mm Fuselage length approx.: 92 mm Wing area approx.: 29,1 dm² Weight: 1300 - 1360 g Box contents: Accesories built-in/included: Included RC-Function/accessory recommendation: Aileron: 2x DS 1550 Elevator: 1x DS 1550 Siderudder: 1x DS 1550 Airbrakes: 2x DS 1550 Motor: DYMOND SMART 60 BEC Needed to complete: Radio: Min 4 - 6 CH Motor: DYMOND GTX-3546 @ 3s LiPo @ 12x6 E ESC: DYMOND VTX-60 BEC Servos: 4-6x DS 1550 Batteries: DYMOND LiPo 1800-2200 mAh 3s Charger: DYMOND B6 EVO V2


close
Comments
Post review

Feedback
/ Register
Your country:
Follow a few simple steps to place an order. Mouse over a picture for details.
Deleted items