TrackStar GenII One Cell 120A 1/12th Scale Sensored Brushless ESC (ROAR/BRCA approved)


Price: $59.09
Bonus: 59
Reviews: 0
Supplier's rating
In Stock
Shipping weight: 163 g
TrackStar GenII One Cell 120A 1/12th Scale Sensored Brushless ESC (ROAR/BRCA approved)
Similiar products Supplier In Stock Price / Weight Bonus points per product Add To Cart / Wishlist
TrackStar GenII One Cell 120A 1/12th Scale Sensored Brushless ESC (ROAR/BRCA approved) TrackStar GenII One Cell 120A 1/12th Scale Sensored Brushless ESC (ROAR/BRCA approved) USA HobbyKing In Stock $55.90
163 g
Bonus: 56
TrackStar GenII One Cell 120A 1/12th Scale Sensored Brushless ESC (ROAR/BRCA approved) TrackStar GenII One Cell 120A 1/12th Scale Sensored Brushless ESC (ROAR/BRCA approved) Europe HobbyKing In Stock $66.61
163 g
Bonus: 67

The Turnigy TrackStar One Cell 1/12th ESC is the latest addition to Hobby Kings Sensored Car ESC range.

The TrackStar One Cell features a built in voltage booster for single cell Lipoly use in 1/12th scale racing.

Using a Fast Silicon Labs MCU and high quality On-Semiconductor MOSFETs the TrackStar One Cell 120A ESC sets a new standard in high quality yet affordable car ESCs. With Intelligent MCU logic the TrackStar series ESCs allow extremely precise start up control and positioning feed back from the motor. This translates in to very smooth start up and acceleration.

Timing Indicator LED
To conform with ROAR's Sportsman Class racing rules and assist race organizers monitor driver compliance in non-timing modified race classes the TrackStar 1/10th ESC includes a timing mode indicator LED. At all times when the ESC is powered on and dynamic motor timing is set to a value greater than zero the white LED will illuminate indicating that the timing mode has been modified.

The Turnigy TrackStar One Cell 120A ESC also boasts a host of programing options not usually found in an ESC at this price and can be programmed with ease via the Turnigy TrackStar programing card (sold separately).

Features:
• Programmable via Turnigy TrackStar programing card (sold separately)
• Firmware can be updated via PC
• 10 throttle profile memory slots. Can be exported through PC
• Timing Indicator LED (Blinky Mode)
• ESC Overheat Protection
• Adjustable Boost and Turbo Timing
• Adjustable Brake and Drag Brake
• Laminated copper stack design efficiently dissapates heat
• Built-in electronic switch is compact and reliable
• "Blinky" Mode (non-timing mode)

Specs:
Constant/Burst Current: 120A / 760A
Motor Compatibility: Brushless sensored and sensorless
Car Compatibility: 1/12 onroad competition
Motor Limits: >3.5T (3 slots, 2 poles, 540 class motor)
Resistance: 0.0003ohm
Battery Cell Count: 1S 3.7V LiPoly
BEC Output: 6V @ 1A, linear
Dimensions: 39x38x19mm
Weight: 41g (without wires)

Now officialy approved by ROAR and BRCA for race use! (To use in those racing series, please download the USB link v1.10 and update the ESC firmware to v2.02)

*Note: Above is a list of some of the key programming options. Many more options are available when used with the PC software (TrackStar Multi-Function Smart Program Box required). See user manual located under the "Files" tab below for full details. TrackStar Link PC software also available for download under the "Files" tab.


close
Comments
Post review

Feedback
/ Register
Your country:
Follow a few simple steps to place an order. Mouse over a picture for details.
Deleted items