POWERBOX iGyro 3e


This product is not available anymore. May be you can find similiar products in the same category (please, follow the link above).

We do not remove such products from the catalogue because customer reviews on them may contain useful information.
POWERBOX iGyro 3e

The iGyro 3e is the little brother of the iGyro SRS, and offers an excellent performance. The control characteristics are identical to those of the iGyro SRS, and naturally the unit’s quality also reflects the very highest PowerBox standard!
The iGyro 3e operates with normal PWM signals at the input and output, making it a straightforward task to install and set up the gyro in existing models. The iGyro 3e is simply looped in between the receiver and servos, and its gain can be adjusted in flight if one auxiliary channel is assigned to it. The net result is that it takes just a few minutes to install and set up the iGyro 3e.

The gain adjuster is divided into two ranges, enabling the pilot to pre-define different flight modes with the transmitter. As standard the iGyro 3e can be operated in Heading or Damping mode. Heading mode has been specially developed for fixed-wing model aircraft, and provides natural handling in the air. As you would expect, Heading mode can be left active for take-off and landing! It is supremely easy to adjust the ranges of the gain adjuster using a laptop,PC, or new with Mobilphone, as the Heading option and the strength of the gyro effect are fully variable, separately for each output.

Naturally the unit also features an integral delta and V-tail mixer, and any orientation in the model is possible.

Features

    Extremely accurate triple-axis MEMS sensor
    Special regulatory algorithm designed for fixed-wing model aircraft
    Three axes distributed to five servos, each adjustable independently
    Input and output with PWM Signals
    Input for in-flight gain adjustment
    Heading or Normal mode can be selected in flight
    Integral delta mixer
    Installed orientation can be selected
    16-bit processor for fast, high-resolution signal processing

Technical Data

    Operating voltage     4.0V - 9.0V
    Current drain Power-on state     40mA
    Maximum load current     20A
    Signal input     PWM
    Servo sockets     5
    Servo signal resolution     0,5µs
    Gyro regulation     Heading- and Normalmode
    Gyro sensor type     MEMS
    Number of sensor axes     3
    Dimensions     43 x 30 x 15 mm
    Weight     36g, inkl. 6 Patchleads
    Temperature range     -30°C to +75°C


close
Comments
Post review

Feedback
/ Register
Your country:
Follow a few simple steps to place an order. Mouse over a picture for details.
Deleted items