FMS MXS 3D 1100mm PNP


This product is not available anymore. May be you can find similiar products in the same category (please, follow the link above).

We do not remove such products from the catalogue because customer reviews on them may contain useful information.
FMS MXS 3D 1100mm PNP

Introducing the all New 1100mm MXS 3D aerobatic plane from Staufenbiel/RocHobby. Designed for the Intermediate to advanced 3D pilot & Built specifically for 3D Flight, the MSX is sure to please even the most capable of 3D pilots. 

Built from super strong EPO foam, the receiver ready MXS is completely glue-less to assemble requiring only 10 screws to complete. After only minutes of assembly, it is ready to add your 4 channel receiver and 3s 2200mAh battery.  Strong tube spars in the wing and tail create a super rigid structure that can withstand even the harshest 3D punishment. The powerful 35-36 1250kv Outrunner, 40amp ESC, & 4 Metal Gear Digital servos are pre-installed and ready to fly out of the box. The preinstalled precision ball links and rods expedite assembly time and provide precise control of nearly any aerobatic maneuver desired. Extra long, servo arms are designed in an over-center position from the control surface horns to provide massive amounts of control surface throw for low speed Harrier & hovering flight. Wing tip Side Force Generators further enhance the low speed performance by directing the airflow over the ailerons for more positive control. Tough but lightweight aluminum landing gear and large 2 1/2” wheels make grass takeoffs and landings a breeze. A large, magnetic hatch makes changing the battery quick and easy!

Painted in Bright Yellow and Black, The New MXS is sure to get attention at the flying field… Easy to assemble, built tough, & 3D ready…. Look no further than the New MXS from FMS Models!

Features

    Easy to assemble glueless design
    New Hollow wing design for reduced weight and rigidity
    Wing tip Side Force Generators for superior Knife Edge and slow maneuvering
    Super strong laminated control surface hinges
    Powerfull 35-36 1250kv outrunner motor
    40amp ESC
    Digital metal gear servos
    Wings and tail remove for transport, however 1100mm size makes transport easy
    Ultra visible Yellow & Black high contrast saint scheme
Specification: Wingspan approx.: 1100 mm Fuselage length approx.: 1080 mm Weight (ready to fly): 1050 g Center of gravity: 70 - 80 mm Type of construction/material wing: EPO Type of construction/material fuselage: EPO Flight time: 5 Min. Box contents: Accesories built-in/included: built-in Motor: Brushless 3536 (1250KV) ESC: Brushless 40A Servos: 4x 9g Digital MG Propeller: 11 x 5,5" Spinner: incl. Landing gear: incl. RC-Function/accessory recommendation: Aileron: 2x 9g Digital MG (incl.) Elevator: 1x 9g Digital MG (incl.) Siderudder: 1x 9g Digital MG (incl.) Motor: 1x 40A (incl.) Needed to complete: Radio: min. 4-Channel Receiver: min. 4-Channel Batteries: Dymond LiPo 2200mAh 3S Charger: Dymond Power 80


close
Comments
Post review

Feedback
/ Register
Your country:
Follow a few simple steps to place an order. Mouse over a picture for details.
Deleted items