Staufenbiel OUTLAW 3D 1200mm PNP

This product is not available anymore. May be you can find similiar products in the same category (please, follow the link above).

We do not remove such products from the catalogue because customer reviews on them may contain useful information.
Staufenbiel OUTLAW 3D 1200mm PNP

The Staufenbiel OUTLAW is a true 3D rebel in wooden construction. Execute the most spectacular manoeuvres. Because with the ultra-light OUTLAW, manoeuvres normally reserved for the F3P indoor fliers are possible. The OUTLAW is available as an ARF version and as a PNP version with built-in electronics.

Ultra-light Construction
The OUTLAW is produced as a balsa construction, which considerably minimises the weight of the model. In conjunction with the very light and already applied Oralight® covering film, an extremely low wing load is achieved.

Powerful Motor
For the propulsion of the OUTLAW, we have developed a special motor. The brushless outrunner motor DYMOND GTX-3546 with 760KV is perfectly matched to the model and produces enormous propulsion and the highest 3-D performance. The GTX-3546 comes already pre-installed in the PNP version. Here, you only need a suitable 60A speed controller. If you opt for the ARF version, you can motorize your OUTLAW according to your personal wishes and requirements.

High Degree of Prefabrication
The 3-D model is available in both the "bare" ARF version and in the PNP version with a particularly high degree of prefabrication. The wings, the tail and fuselage are extensively covered. All rudders are ready hinged and equipped with ball links (supplied in the ARF version). In the PNP version, 4 digital servos with metal gears are installed and wired ready to fly in addition to the ball linkages and the installed motor. All you need for the final assembly is to simply screw together the individual parts.

Easy Access
A large hatch on the underside of the fuselage ensures quick and easy access to the battery and the fuselage interior. The hatch is lockable and completely removable.


    Agile stunt model for spectacular 3-D performance
    Ultra-light balsa construction
    Elaborate, multi-coloured Oralight® covering
    All rudders are completely hinged
    Ball linkages on all rudders
    Easy access to the battery thanks to large hatch on fuselage underside
    Built-in DYMOND GTX-3546 (760KV) brushless outrunner motor (only PNP version)
    4 built-in DYMOND DS 3510 digital servos with metal gears (only PNP version)
    Including propeller (only PNP version)
    Spinner not included in the box contents (required: 45 mm)  
    Richly illustrated manual in English, German and French
Specification: Wingspan approx.: 1200 mm Fuselage length approx.: 1315 mm Wing area approx.: 64,0 dm² Weight (ready to fly): 1800 g Airfoil: SYM Box contents: Accesories built-in/included: built-in Motor: DYMOND GTX-3546 (760KV) Servos: DYMOND DS 3510 MG (4x) Propeller: 14 x 7" RC-Function/accessory recommendation: Aileron: 2x DS 3510 MG (incl.) Elevator: 1x DS 3510 MG (incl.) Siderudder: 1x DS 3510 MG (incl.) Motor: 1x 60A Needed to complete: Radio: min. 5-Channel Receiver: min. 5-Channel ESC: DYMOND Smart 60 Spinner: 45 mm Batteries: DYMOND LiPo 3200mAh 4S Charger: DYMOND Power 80

Post review

/ Register
Your country:
Follow a few simple steps to place an order. Mouse over a picture for details.
Deleted items