Staufenbiel SEAWIND 1450mm PNP


This product is not available anymore. May be you can find similiar products in the same category (please, follow the link above).

We do not remove such products from the catalogue because customer reviews on them may contain useful information.
Staufenbiel SEAWIND 1450mm PNP

The SEAWIND is an amphibian of the latest generation. When the installed landing gear is retracted, the landing skid in the middle of the fuselage comes out and allows for take-offs and touch-downs on the water. The SEAWIND from Staufenbiel is a real eye-catcher. In the air, on land and on water.

Sporty flight performance
Thanks to its low take-off weight, the high engine capacity and the low loads on the wings, the SEAWIND is a true athlete. Loops, rolls, turns, or – after a slow-scale flyover, a beautiful landing true to the original – on snow, water, asphalt or lawn. No problem for the SEAWIND from Staufenbiel.

Robust retractable landing gear & controllable nose wheel
With the landing gear extended, the plane can land on asphalt and lawn. The landing flaps ensure excellent control of the landing speed in the process. Thanks to the controllable nose wheel, the SEAWIND can also be steered on ground.

Landing on water & snow
When the landing gear is retracted, the SEAWIND can also touch-down on water and snow by virtue of its wide landing skid on the fuselage. The model can also be easily steered on water thanks the water rudder at the rear end of the fuselage.

Hinged cockpit
The detailed cockpit rounds out the SEAWIND’S authentic optics. Below the hinged cabin hood, rigid foam seats are installed, and below them, there is a large opening to the inside of the fuselage, the battery chamber and the electronics.

Short assembly time
The SEAWIND is made of EPO rigid foam material and has a preinstalled high-performance Brushless drive and 7 installed servos for the aileron, pitch elevator and yaw rudder, landing flaps and the retractable landing gear. A lighting set additionally comes already installed. In just a few steps, the SEAWIND is ready for take-off. All that's needed to navigate the amphibian over any terrain is a 3S LiPo battery and a 6-channel remote control system.

Features

    Replica true to the original made of EPO rigid foam material
    Scale attachments made of plastic
    Brushless motor, ESC and 7 servos installed and wired ready for flying
    Installed landing flaps
    Installed lighting
    Retractable landing gear with controllable nose gear
    Wide landing skid and controllable water rudder
    Hinged cockpit for easy access to the battery
    Quick and simple assembly
    Assembly instructions with lots of pictures in German, English and French
Specification: Wingspan approx.: 1460 mm Fuselage length approx.: 1220 mm Wing area approx.: 36,5 dm² Weight (ready to fly): 1250 g Type of construction/material wing: EPO Type of construction/material fuselage: EPO Box contents: Accesories built-in/included: built-in Motor: BL-3028 (1350KV) ESC: Hobbywing Skywalker 40A (LiPo Deans T) Servos: 7x Micro 9g Propeller: incl. Spinner: incl. Landing gear: incl. RC-Function/accessory recommendation: Aileron: 2x 9g (incl.) Elevator: 1x 9g (incl.) Siderudder: 1x 9g (incl.) Airbrakes: 1x 9g (incl.) Landing gear: 2x 9g (incl.) Needed to complete: Radio: min. 5-Channel Receiver: min. 5-Channel Batteries: DYMOND LiPo 2200mAh 3S Charger: DYMOND Power 80


close
Comments
Post review

Feedback
/ Register
Your country:
Follow a few simple steps to place an order. Mouse over a picture for details.
Deleted items