Staufenbiel EPSILON XL3 4000mm ARF


This product is not available anymore. May be you can find similiar products in the same category (please, follow the link above).

We do not remove such products from the catalogue because customer reviews on them may contain useful information.
Staufenbiel EPSILON XL3 4000mm ARF

Gentle giant in a new guise

The EPSILON models are one of the most successful glider model ranges of the last few decades. EPSILON is now available in a variety of sizes and designs - and now the largest model in the range is getting a new look. The EPSILON XL3.

Powerful in thermals
The wings have a high-power and high-performance MH-32 profile specially designed for thermal flight. Due to the low wing load of the EPSILON XL3, a slow descent is achieved, while the profile guarantees the necessary power at high speeds.

Gentle landings and easy takeoffs
The 4m model can be landed gently and precisely in the butterfly position even in tight spaces thanks to its non-problematic slow flying characteristics and plain flaps. Furthermore, manual launches can be easily performed unaided due to the powerful drive.

High-quality construction
The fuselage of the EPSILON XL3 consists of red stained fibreglass and features a stabiliser on the tailplane. The wing, which is covered with ORACOVER®, has a Styrofoam core and is clad with high-quality abachi wood, providing a solid and hard surface. Both the fuselage and the surfaces are reinforced at key points with carbon fibre. The built-in motor bulkhead and rudder horns are made of aluminium, the wing torsion bars of high-quality fibre-glass. In addition, the geometry of the EPSILON XL3 side rudder linkage has been improved.

Little construction effort
Whether in the "naked" ARF version or the almost-ready-to-fly PNP version - both versions display an extremely high degree of pre-fabrication, so that little construction effort is required.

Secured areas (PNP version)
Thanks to the pre-installed MPX Multilock system, the wings provide the necessary support. Pre-installed MPX plug connections in the wings make it easier to join the servo cables together.

Powerful motor (PNP Version)
The PNP version of the EPSILON XL3 has a built-in HIMAX high-performance motor with a diameter of 42 mm, a length of 60 mm, 570 kV and 950 watts. The scope of supply also includes the enclosed aluminium spinner and Aeronaut 16 x 8" folding propeller. In addition, the PNP version has six digital servos with metal gearbox already installed and wired in the servo frames.

New look
The EPSILON XL3 now has a new, fresh and more up-to-date look. The GRP fuselage is painted red and the wings covered with an appealing décor. On the underside of the wings there are high-contrast block stripes, which enable the pilot to readily detect the orientation of his or her model.

A lot of glider for a low price
Like the other members of this range, the EPSILON XL3 will impress any glider enthusiast with its price/ performance ratio. Find out more about the Staufenbiel EPSILON XL3.

Features

    painted GFR fuselage
    4-piece Styrofoam surface lined with abachi wood
    with plain flaps and stabiliser
    improved side rudder linkage
    covered with original ORACOVER® film
    built-in aluminium motor bulkhead for motors with a diameter of up to 42 mm
    built-in rudder horns made of aluminium
    built-in wing torsion bars made of GRP
    carbon fibre reinforcements in the fuselage and wings
    original MPX Multilock wing locking system installed (only PNP version)
    built-in HIMAX 4226-570KV motor with 950 watts (only PNP version)
    including CAM Prop 16x8" and aluminium spinner (only PNP version)
    2 Dymond DS 1550 MG and 4 Dymond D 260 MG pre-installed in servo frames (only PNP version)
    pre-installed cable harness with MPX plug connection and locked servo connections (only PNP version)
    installation instructions with lots of pictures in German, English and French
The package of this product has over 1.20 m in length, it falls to corresponding surcharges. Specifications: Wingspan approx.: 4000 mm Fuselage length approx.: 1510 mm Weight (ready to fly): 4000 g Wing area approx.: 90,0 dm² Airfoil: MH-32 Type of construction/material wing: Balsa/Styro Type of construction/material fuselage: GFK Center of gravity: 100 - 120 mm RC-Function/accessory recommendation: Elevator: 1x D 260 MG Siderudder: 1x D 260 MG Aileron: 2x DS 1550 MG Flaps: 2x D 260 MG Motor: 1x Smart 60 Needed to complete: Radio: min. 7-8 Channel Receiver: min. 7-8 Channel Motor: DYMOND X-MAX X42-L ESC: DYMOND Smart 60 Servos: 4x DYMOND D 260; 2x DYMOND DS 1550 Propeller: 16 x 8" Spinner: 41 mm Batteries: DYMOND LiPo 4000-5000mAh 4S Charger: DYMOND LiPo Charger


close
Comments
Post review

Feedback
/ Register
Your country:
Follow a few simple steps to place an order. Mouse over a picture for details.
Deleted items