FMS Swift Delta Wing 675mm PNP - High Speed

This product is not available anymore. May be you can find similiar products in the same category (please, follow the link above).

We do not remove such products from the catalogue because customer reviews on them may contain useful information.
FMS Swift Delta Wing 675mm PNP - High Speed

We clocked the RocHobby Swift at 85mph using a pocket radar only to find out later we were using an old LiPo with high IR during the test! Not only is this plane fast but it also is very well mannered and very aerobatic. The wings and fuselage are a single piece of EPO foam with carbon rods molded in for maximum strength and durability. In addition the nose cone is a magnetic break away design, the servo pushrods are top mounted for maximum protection during belly landing, and there is a skid plate on the bottom to protect the fuse and the rear mounted prop. We are not sure if a plane exists that is more fun to fly! The plane is very simple to assemble so you can be in the air in about 30 minutes.


    85+ mph speed clocked using the pocket radar
    EPO foam construction
    very simple assembly
    Brushless motor, ESC and servos installed
Specification: Wingspan approx.: 675 mm Fuselage length approx.: 630 mm Weight (ready to fly): 570 g Type of construction/material wing: EPO Type of construction/material fuselage: EPO Assembly Time appr.: 30 Min. Top-Speed: 140 km/h Flight time: 5 Min. Box contents: Accesories built-in/included: built-in Motor: BL 2215-3400KV ESC: 40A (4mm Gold) Servos: 2x 9g Servos Propeller: 4.5 x 4.5E Spinner: incl. RC-Function/accessory recommendation: Aileron: 2x 9g (incl.) Motor: 1x 50A (incl.) Needed to complete: Radio: min. 4-Channel Receiver: min. 4-Channel Batteries: DYMOND LiPo 2200 3S Charger: DYMOND LiPo Charger

Post review

/ Register
Your country:
Follow a few simple steps to place an order. Mouse over a picture for details.
Deleted items