TLR 22-4 (2.0) 4WD Buggy 1:10 Race KIT


This product is not available anymore. May be you can find similiar products in the same category (please, follow the link above).

We do not remove such products from the catalogue because customer reviews on them may contain useful information.
TLR 22-4 (2.0) 4WD Buggy 1:10 Race KIT

Since its debut, the original 22-4™ buggy has been winning races all over the world. Version 2.0 adds refinements to this successful platform that make it easier to drive and maintain.
Gear Differentials

The all-new, low maintenance gear differentials are designed narrow, so there is no need to compromise the inner pivot or roll center widths. Besides providing improved performance on all types of surfaces, the gear diffs can be accurately and consistently tuned using diff fluid. Their cases are machined from 7075-T6 aluminum but they do not weigh any more than stock ball diffs.
Optimized Suspension Geometry

Converting to the 22™ off-set, rear-hub geometry has widened the rear track width, creating more stability in the rear end so racers can push the car harder with confidence. The 22 rear hub is paired with a vertical-mount, rear-camber block. This provides multiple adjustments that allow the rear roll center to be optimized for any conditions.
Multiple Battery Configurations

The chassis and mud guard are designed to accommodate a variety of battery configurations. A shorty pack can be mounted forward or backward on the left side of the chassis using the molded locator. Saddle packs can be mounted with one half on each side of the chassis. When using a saddle pack, the left side can be moved fore or aft to adjust weight bias.
Popular Tuning Parts Included

The kit comes standard with 12.5° aluminum caster blocks, a 2.5°rear toe plate, a pink rear sway bar, a vertical-ball stud rear camber block, front and rear CVAs and a cab-forward body. These parts maximize the buggy's performance by improving stability, balance and adjustability.
Split Belt Covers

The center belt cover can now be removed without having to remove the rear belt cover, making drivetrain maintenance quicker and easier.
CVA Driveshafts

This popular tuning option for the original 22-4 buggy is now included with the 2.0. The CVAs lock up under acceleration and keep the car flatter, especially during hard acceleration.
Lightweight 2.5mm 7075-T6 Aluminum Chassis

The aluminum main chassis plate has been CNC machined for optimal fit and flex. Milled pockets in the chassis reduce weight, including an open pocket under the motor that reduces temps.
Centralized Forward Motor Placement

The 3-belt drive train allows for the motor to be mounted directly in the center of the chassis, and towards the front. This motor placement is optimized and gives the 22-4 2.0 a unique balance that is a dream to drive.

Features

    Gear differentials
    Revised suspension geometry
    Multiple battery mounting configurations
    Popular tuning parts included
    The center and rear belt cover are split and do not interlock for easier maintenance
    CNC machined 2.5mm 7075-T6 aluminum chassis features milled pockets to reduce weight and maintain proper flex
    Lightweight 2.5mm 7075-T6 aluminum chassis
    CVA driveshafts
    Mid-motor design
    Cab-forward body with adjustable wing

Needed To Complete

    Motor
    Electronic Speed Control
    Servo
    Tires
    Radio System
    Pinion Gear
    Charger
    Battery
Specification: Type: RC Buggy KIT Scale: 1:10 Length: 419 mm Width: 239 mm Wheelbase: 282 mm Chassis: 2,5mm 7075-T6 Aluminum Needed to complete: Radio: min. 2-Channel Receiver: min. 2-Channel Motor: Team Orion VST2 Pro 5.5T Pinion: X ESC: X Servos: Spektrum S6240 Batteries: Team Orion LiPo 5000mAh Charger: X


close
Comments
Post review

Feedback
/ Register
Your country:
Follow a few simple steps to place an order. Mouse over a picture for details.
Deleted items