FMS Yak-130 Jet 800mm PNP (grey)

This product is not available anymore. May be you can find similiar products in the same category (please, follow the link above).

We do not remove such products from the catalogue because customer reviews on them may contain useful information.
FMS Yak-130 Jet 800mm PNP (grey)

FMS has been committed to the development and production of propeller aircrafts for years, and we have never stopped enhancing our products from the year we were founded. Utilizing many of the new concepts from our propeller planes, FMS is upgrading and adding new and exciting Electric Ducted Fans to our lineup of planes.

The first in line for improvement is our NEW Yak130 featuring our new and improved 70mm fan unit. The craftsmanship that has gone into this model began with the initial concept prototype. After which, refinements were determined and implemented, bringing to you the most accurately defined Yak on the current market.

Some of the improvements and redesign include a plastic leading edge on the air inlet duct, providing a smooth flow of air into the duct while protecting the inlet from possible damage from a less than perfect landing. Everything, from the panel lines, cockpit interiors and scaled pilot down to the removable drop fuel tank are finely detailed. Even assembly has been redesigned to make your time in getting ready for flight quick and easy. There is a main spar tube that runs through the fuselage and wing to help strengthen the airframe which is then fastened with screws. The surface control horns and wires are preinstalled and utilize our ball link design making for very accurate flight control.

The overall performance has been a major consideration for the Yak, and using our latest 12-blade 70mm ducted fan, together with the Predator 2860-KV1850 motor, 70 AMP ESC has resulted in great power and speed with a 6S battery. The added bonus to this power system, is the sound this new 12 blade makes. You can hear the power it provides. The landing gear retract units use a 3.5 strut wire for support and strength for those less than perfect landings. All servos are pre-mounted and are our own digital design, making for precise maneuvers whether in high or low speed flight.

We have incorporated our new environmentally friendly water-based paint. The water-based paint has provided better spreadability and a glossier appearance. It can protect the fragile foam parts under any condition.


    Scaled appearance, with pilot, oil tank, retractable landing gear
    Powerful inner running motor with latest 70mm 12 blades ducted plus the high quality Predator 70A ESC
    Metal digital servos for better controlling capacity
    Retractable front and rear landing gear
    Function Flaps
    Ball link design
    Button type canopy, set free from fall-off problem
    The simplified assembly structure of main wing set
    Water-based paint for better color and gloss

Specification: Wingspan approx.: 800 mm Fuselage length approx.: 1060 mm Wing area approx.: 19 dm² Weight (ready to fly): 1900 g Center of gravity: 80-85 mm Type of construction/material wing: EPO Type of construction/material fuselage: EPO Assembly Time appr.: < 30 min. Flight time: 5 min. Box contents: Accesories built-in/included: built-in Motor: BL-Inrunner 2860 (1850KV) ESC: 70 A Impeller: 70 mm Servos: 8x Digital 9g MG RC-Function/accessory recommendation: Aileron: 2x 9g MG (incl.) Elevator: 1x 9g MG (incl.) Siderudder: 1x 9g MG (incl.) Airbrakes: 2x 9g MG (incl.) Motor: 1x 70A (incl.) Landing gear: 2x 9g MG (incl.) Needed to complete: Radio: min. 6-Channel Receiver: min. 6-Channel Batteries: LiPo 3200 mAh 6S Charger: LiPo Charger

Post review

/ Register
Your country:
Follow a few simple steps to place an order. Mouse over a picture for details.
Deleted items