Staufenbiel YAK-11 1450mm PNP


This product is not available anymore. May be you can find similiar products in the same category (please, follow the link above).

We do not remove such products from the catalogue because customer reviews on them may contain useful information.
Staufenbiel YAK-11 1450mm PNP

Heroes wanted!

So you have always wanted to fly a warbird - but just have too much respect for their challenging take-off and landing characteristics? Well those times are over! With the YAK-11, Staufenbiel is bringing a ready-to-fly warbird trainer to the market and in doing so, making the handling of military aircrafts quick and easy to learn. Buckle up and experience the fascinating world of the warbirds.

History
The Yakovlev Yak-11 was constructed in 1944 by Alexander Yakovlev, specifically for the advanced flight training of fighter pilots. At that time, Yaklovlev was able to pull from his experience with the extremely successful single-seat fighter series, the Yak-1, 7, 9 and 3, and apply the advantages of these aircrafts to the Yak 1. Finally, he combined all of that with a radial engine.

The two-seat aircraft was used by all member states in the Warsaw Pact as well as in the Middle East, Austria and China. The wingspan of this military machine, which was primarily manufactured in Czechoslovakia, came to 9.4 meters and it was propelled through the air by an air-cooled 7 cylinder radial motor with 700 hp.

With the reproduction of the YAK-11, Staufenbiel is bringing a scale model to the market that impresses with its detailed construction and powerful, true-to-original flight performance.

Developed by Stefan Wurm
The YAK-11 prototype was developed by the famous airshow pilot, Stefan Wurm. After countless test flights, Stefan Wurm and the development team from Staufenbiel were able to optimize the model and make it a deserving member of this successful series.

Light and Stable Construction
This model is constructed out of EPO hard foam material, which is not only very light but also incredibly robust. Minor damages can be quickly and easily repaired with superglue.  

Powerful Propulsion
A high powered brushless motor is built into Staufenbiel’s YAK-11. The motor consists of a KV 410 external rotor motor and a Hobbywing 80A regulator with an 5A UBEC and it is powered by a 6S battery. In combination with an APC propeller this model boasts a powerful flight and a noteworthy climbing performance. As a result this model still remains stable in the air.

Landing Gear Fit For Field Landings
This military trainer has pre-installed and very robust electronic landing gear with proportions true to scale. Thanks to the 80mm sponge rubber wheels, not only does the YAK-11 perform well on hard runways but also on grass surfaces during take-offs and landings. On the ground, the aircraft can be maneuvered into the correct position with its movable tail wheel.

Large Split Flaps
In order to reduce the approach speed for landing, the YAK-11 has pre-fitted and installed split flaps that enable highly controlled landings.

Authentic Visual Design
This model offers numerous scale details and exact proportions. In addition it has visually authentic rivets and panel lines, mock exhaust pipes and a painted pilot figurine. However it is not only the appearance of the model but also the flight performance, with the characteristic Yaklovlev wing geometry, that makes the the model a smaller yet in all other ways equal counterpart to the original.

Quick Assembly
Through the built-in electronics and the high degree of prefabrication, this model aircraft can be assembled in less than 30 minutes.

Features

    Military aircraft with built-in motor, regulator and servos
    Developed by Stefan Wurm
    Full aerobatic flight capabilities
    Powerful and true-to-original flight characteristics
    Electric retractable landing gear fit for field landings
    Maneuverable tail wheel
    6 built-in digital servos with metal gearbox
    Built-in servos at the rear for the elevator and the rudder (direct control)
    Constructed out of stable EPO hard foam material
    Very quick assembly
    Including APC propeller and spinner
    Detailed and illustrated assembly instructions in English, German and French

Additional Accessories Required

    Remote control system with at least 6 channels
    6S LiPo battery with 5000 mAh
    Compatible LiPo charger
    Optional: 3 axis stabilization system

Specification: Wingspan approx.: 1450 mm Fuselage length approx.: 1300 mm Wing area approx.: 32,0 dm² Weight (ready to fly): 3000 g Center of gravity: 110 - 115 mm Type of construction/material wing: EPO-35 Type of construction/material fuselage: EPO-35 Type of construction/material landing gear: Aluminum Assembly Time appr.: < 90 min. Box contents: Accesories built-in/included: built-in Motor: Brushless 5052 (410KV) ESC: Hobbywing 80A (EC5) + 5A UBEC Servos: 4x Digital 12g MG, 2x Digital 19g MG Propeller: APC 17x10" Spinner: 86 mm Landing gear: Electric RC-Function/accessory recommendation: Aileron: 2x Digital 12g MG (incl.) Elevator: 1x Digital 19g MG (incl.) Siderudder: 1x Digital 19g MG (incl.) Airbrakes: 2x Digital 12g MG (incl.) Motor: 1x 80A (incl.) Landing gear: Electric Needed to complete: Radio: min. 6-Channel Receiver: min. 6-Channel Batteries: 6S LiPo 5000mAh Charger: LiPo Charger Others: Dymond 3X Wing Control (optional)


close
Comments
Post review

Feedback
/ Register
Your country:
Follow a few simple steps to place an order. Mouse over a picture for details.
Deleted items