Eachine Aurora 100 Racing Frame w/ Minicube Compatible Frsky RX F3 Blheli_S 10A BR1104 7000KV Motor


Price: $119.59
Bonus: 120
Reviews: 0
Supplier's rating
In Stock: 50 pcs
Eachine Aurora 100 Racing Frame w/ Minicube Compatible Frsky RX F3 Blheli_S 10A BR1104 7000KV Motor

Eachine Aurora 100 Racing Frame w/ Minicube Compatible Frsky RX F3 V1.1 Blheli_S 10A Racerstar BR1104 7000KV Motor 2035 Prop












Description:

Items Specification
Eachine Aurora 100 Brushless Racing Frame

Item name: Aurora 100 FPV Racing Frame 
Wheel base: 100mm
Material: carbon fiber
Weight: 14.5g
Adjustable camera angle
Fly indoors or out.
Very light and strong construction.
 
Eachine Minicube Frsky Compatible Receiver

Frequency range: 2.403-2.479Ghz
Channels: 8CH 
Work mode: D8 Mode
Output: SBUS
Antenna length: 100mm
No ground interference ( Transmitting and receiving 1 m from the ground): >500m
Built-in Buzzer (Low voltage alarm) Configure by Betaflight configurator
Working current: 80mA
Dimensions: 27*27*7mm
Weight: 3.5g
Compatible with FRSKY ACCST 
Compatible with X9D(Plus)DJT/DFT/DHT
Telemetry: RSSI, 1S-3S voltage (A1), 1S-3S voltage (A2)
 
Eachine Minicube 10A BLHeli_S 4 In 1 2-3S ESC

Size: 27mm*27mm*5mm
Mount hole: 20mm*20mm
Firmware version: BLHELI_S 16.5
BB2, 48MHZ Chip
Lipo Battery: 2-3S
Con. Current: 10A
Peak Current: 15A (10S)
BEC: 5V @0.1A
Programming: YES
Betaflight passtrough ready
Dshot600 ready(Default)
Support oneshot42 oneshot125 Multishot Dshot
Damped light on
 
Eachine Minicube F3 V1.1 6DOF Flight Controller

Size: 27mm*27mm*5mm
Mount hole: 20mm*20mm
Working voltage: 2-3S Lipo
Processor: STM32 F303 MCU
Sensor: SPI Sensor MPU6000
Built-in Betaflight OSD (Batt voltage, RSSI, Fly mode, Flytime, Craft name etz.)
Firmware version: Betaflight 3.1 Dshot ready
Target: OmnibusF3

This V1.1 version comes with SH1.0 plug instead of USB interface, intergrated filtration module.
 
 
Racerstar BR1104 7000KV 1-2S Brushless Motor

Height: 17.5mm
Width: 14mm
Weight: about 5.5g
Shaft: 1.5mm
Shaft length: 4.1mm
KV (rpm/V): 7000
Voltage: 3.7-7.4V
Battery: 1-2S lipo battery
Load current: 3.1A
 
10 Pairs Racerstar 2035 4 Blade Propeller 

Length: 2 inch, about 50mm
Color: green, light blue, yellow, black, red
Quantity: 10 pairs (the same color)
Mounting hole: 1.5mm
Weight: 0.7g per propeller
Light, strong and well balanced for micro brushless FPV drones
Applicable for 1102, 1103, 1104, 11xx motors 
 

Package included:
1 x Eachine Aurora 100 Brushless Racing Frame
1 x Eachine Minicube Frsky Compatible receiver
1 x Eachine Minicube 10A BLHeli_S 4 In 1 ESC
1 x Eachine Minicube F3 V1.1 6DOF Flight Controller
4 x Racerstar BR1104 7000KV Brushless Motor
10 x Racerstar 2035 propeller CW
10 x Racerstar 2035 propeller CCW
40 x M2*7 screw
 


close
Comments
Post review

Feedback
/ Register
Your country:
Follow a few simple steps to place an order. Mouse over a picture for details.
Deleted items