Racerstar 1103 BR1103B 8000KV Motor Gold w/ 1535 Prop Eachine Minicube Compatible DSM RX F3 ESC


This product is not available anymore. May be you can find similiar products in the same category (please, follow the link above).

We do not remove such products from the catalogue because customer reviews on them may contain useful information.
Racerstar 1103 BR1103B 8000KV Motor Gold w/ 1535 Prop Eachine Minicube Compatible DSM RX F3 ESC

4X Racerstar 1103 BR1103B 8000KV 1-3S Brushless Motor Gold w/ 1535 4 Blade Prop Eachine Minicube Compatible DSM2 DSMX Receiver F3 V1.1 Blheli_S 10A ESC
















Description:

Items Specification
Racerstar BR1103B 8000KV Motor

Brand: Racerstar 
Item No: BR1103B 8000KV Brushless Motor
Height: 15mm
Width: 13.6mm
Weight: about 3.7g
Shaft: φ1.5mm
KV (rpm/V): 10000KV 
Voltage: 3.7-11.1V
Battery: 1-3S lipo battery
Color: gold
 
Racerstar 1535 4 Blade ABS Propeller

Brand: Racerstar 
Item name: 1535 4 Blade ABS Propeller
Length: 1.5 inch, about 38mm
Color: light blue
Quantity: 10 pairs (the same color)
Mounting hole: 1.5mm
Weight: 0.6g
Light, strong and well balanced for micro brushless FPV drones
Applicable for 1102, 1103 motors 
 
Eachine Minicube 20x20mm Flytower DSMX DSM2 Compatible Receiver

Item name: Minicube DSM2/ DSMX satellite Receiver 
Frequency range: 2.403-2.479Ghz
Input power: 5V
Response time: 22ms / 11MS
Resolution: 2048
Display method: LED
Operating voltage: 3.3V
Working current: 60MA
Size: 27mm*27mm*7mm
Mount hole:20mm*20mm
Weight: 3.1 g
Antenna length: 100mm 
Data format: Serial port
Protoco: DSM2/DSMX
Distance: no ground interference (1 m from the ground ) > 300m
Uses: indoor small aircraft.
Compatible Transmitters: DSM2 / DSMX series of remote control
Built-in Buzzer (Low voltage alarm) Configure by Betaflight configurator
 
F3 6DOF V1.1 Flight Controller

Size: 27mm*27mm*5mm
Mount hole: 20mm*20mm
Working voltage: 2-3S Lipo
Processor: STM32 F303 MCU
Sensor: SPI Sensor MPU6000
Built-in Betaflight OSD (Batt voltage, RSSI, Fly mode, Flytime, Craft name etz.)
Firmware version: Betaflight 3.1 Dshot ready
Target: OmnibusF3

This V1.1 version comes with SH1.0 plug instead of USB interface, intergrated filtration module.
 
 
10A BLHeli_S 4 In 1 ESC

Size: 27mm*27mm*5mm
Mount hole: 20mm*20mm
Firmware version: BLHELI_S 16.5
BB2, 48MHZ Chip
Lipo Battery: 2-3S
Con. Current: 10A
Peak Current: 15A (10S)
BEC: 5V @0.1A
Programming: YES
Betaflight passtrough ready
Dshot600 ready(Default)
Support oneshot42 oneshot125 Multishot Dshot
 
Package included: 
4 x Racerstar BR1103B 8000KV Motor gold 
10 x Racerstar 1535 4 Blade propeller CW light blue
10 x Racerstar 1535 4 Blade propeller CCW light blue
1 x Eachine Minicube DSM2 DSMX Compatible Receiver
1 x Eachine Minicube F3 V1.1 6DOF Flight Controller
1 x Eachine Minicube 10A BLHeli_S 4 In 1 ESC
 


close
Comments
Post review

Feedback
/ Register
Your country:
Follow a few simple steps to place an order. Mouse over a picture for details.
Deleted items