DC 5V 8 Channel Indicator Relay Output Relay Module With PC Control Panel / USB Interface


Price: $21.46
Bonus: 21
Reviews: 0
Supplier's rating
In Stock: 50 pcs
DC 5V 8 Channel Indicator Relay Output Relay Module With PC Control Panel / USB Interface

Description:
 
Three modules are equipped with MICRO USB and TTL level serial interface. Specific configuration is as follows:
 
1. MICRO USB: standard mini USB female port, you can extend the line equipment to communicate directly with the PC and other via USB.
2. TX: serial interface transmission end.
3. RX: serial interface receiver.
4. 5V: positive power supply.
5. GND: power ground.
6. 5V power outlet: ICSE014A have only used when insufficient MICRO USB powered.
 
Use:

1. USB Use
Module is connected via USB and PC. Connections as shown below:
Then open the "Relay Board Manager" module directly control. Use of the software see "RelayBoardManager_Reference".
 
2. Use the serial port
Module via the serial port can communicate directly with other devices. Connection as follows:
Module can receive a single byte instructions issued by the host computer (9600 baud):
PC 0x50 0x51
ICSE012A 0xAB
ICSE013A 0xAD
ICSE014A 0xAC
When the module receives a 0x51 after normal working condition, each module receives a byte of data will directly control the start and stop of the relay and the brightest. Every control one relay data ('0' start, '1' indicates stop). For ICSE012A (4-way) and ICSE013A (2-way), only the lower four, and low 2 data is valid, other bits of data can not afford to control the action.

Package included:

1 x DC 5V 8 Channel Indicator Relay Output Relay Module











close
Comments
Post review

Feedback
/ Register
Your country:
Follow a few simple steps to place an order. Mouse over a picture for details.
Deleted items