SPC 95GF 95mm Brushless FPV Racing Drone BNF With Omnibus F3 4in1 BLheli_s 5.8G 48CH 600TVL


This product is not available anymore. May be you can find similiar products in the same category (please, follow the link above).

We do not remove such products from the catalogue because customer reviews on them may contain useful information.
SPC 95GF 95mm Brushless FPV Racing Drone BNF With Omnibus F3 4in1 BLheli_s 5.8G 48CH 600TVL
Product variation In Stock Price Bonus points per product Add To Cart / Wishlist

SPC 95GF 95mm Brushless FPV Racing Drone BNF With Omnibus F3 4in1 BLheli_s 5.8G 48CH 600TVL 















Specification:
Brand name: SPC Maker
Product model: SPC 95GF
Wheelbase: 95mm
Size: 76mm*87mm*50mm
Weight: 72g (without battery)
Flight weight: 105g (include battery)
Motor: SPC Maker S1104 7500KV brushless motor
ESC: Mini 4 in 1 BLheli_s ESC (2-4S LiPo)
Propeller: 50mm 4-blades propeller
Receiver: Frsky/DSMX/Flysky/Futaba(optional)
Camera: RunCam Micro Swift 1/3 "600TVL FPV camera 2.1mm lens CCD camera
VTX: 5.8g 25MW-200MW 48CH Video transmitter
Flight controller: OSDOminibus F3 flight controller integrated with OSD module
OSD: Betaflight OSD
Firmware of flight controller: Betaflight_3.1.0_OMNIBUS
Flight time: 4 minutes 
Rear LED Ready( LED_Strip function)
Buzzer Ready
Battery: 11.1V 350mAh 30C lipo battery

Ominibus F3 flight controller integrated with OSD module: 
-Powered by MPU6000 sensor for quick response to acceleration, integrated with 5V/1A BEC and OSD module
 (This is 6DOF version, no barometer and compass).
-Designed for small size FPV quads with a frame smaller than 280mm, especially ideal for quadcopters smaller
 than 130mm to exhibits its advantages in small dimensions and multiple functions.
-It provides all the functions of F3 6DOF version, but weighs only 8 grams. The size is only 27*27mm. Mounting
 hole size is 20mm (2.5mm hole).
-Designed for quadcopter with LC filter. It supports CF and BF firmware (Omnibus F3)
-STM32F3CCT6 microprocessor, 256K memory, MPU6000 sensor, SPI port, faster processing speed.
-Constant current: 10A*4 (maximum current: 15A*4, 5s)
-Supports 2-4S LiPo input.
-Built-in 5V 1A BEC.
-Supports popular receivers such as SBus, PPM, DSMX.
-Buzzer, programmable LED, voltage monitoring, HLHeli ESC.

4 in 1 BLheli_s ESC:
Input voltage: 2-4S LiPo and 2-4S HV LiPo
BEC Output: Not available
Constant current of a single ESC unit: 10A 
Maximum current: 15A 5 second.
Dimensions: 27*27mm (main board)
31*31.5mm (including soldering pads and extruded part)
Weight: 6.3g

Firmware: BLHeli_s
Supports D-Shot, Oneshot, rotation directions.
Processor: SILABS  EFM8BB21F16G
MOS FET: TPN2R703NL
Driver: new generation 3 in I MOS

Camera parameters:
Frequency band: 5362-5945MH
Channel: 48
Modulation type: FM
Select channel: switch
Channel display: CH1-CH8 channel display with 8 LEDs, and A-F frequency group display with 6 LEDs
Transmit power: 13±1dBm 
Frequency control: PLL
All harmonic: Max-50 dBm
Frequency stability: ±100KHz(Typ.)
Frequency precision: ±200KHz (Typ.)
Channel disk failure: 1dB
Antenna port: 50 Ω
Input format: NTSC/PAL
SENSOR: PAL: 720×540/NESC: 640×480 1/4 "
LENS ANGEL: H: 120 °/ V: 100 °
Baseband interface: P1, 27*2
Energy consumption: 200-215MA@5V DCIN
Supply voltage: 2.9-5, 5V
Operating temperature:-10℃~+ 60℃
Profile dimension: 14, 5 mm×12, 2 mm+14, 5 mm×12 mm

Compatible:
1.DSM2 Receiver Support Spectrum/JR(DSM2 protocol) DEVO10/DEVO 7E (with deviation firmware).
2.Frsky Receiver Support FRSKY taranis X9D/X9D PLUS (D16 mode), and XJT (D16 Mode), DJT DFT DHT Transmitter.
3.Flysky Receiver Support FS-I6, FS-I6X, FS-I6S, FS-TM8, FS-TM10, FS-I10 and other second-generation AFHDS 2A
   protocol remote control
4.Futaba Receiver Support TM7,TM8, TM10, TM14 T6EX-2.4G, 7C-2.4G, T8FG, T10CG , T12FG.T14SG. 

Receiver Setup and Binding Methods

Package include:
1 x SPC Maker 95GF Frame
1 x Ominibus F3 flight controller integrated with OSD module
1 x Frsky/DSMX/Flysky/futaba(optional receiver)
4 x SPC Maker 1104 7500KV brushless motor
1 x Mini 4 in 1 BLheli_s ESC (2-4S LiPo)
4 x 50mm 5-blades propeller CW
4 x 50mm 5-blades propeller CCW
1 x RunCam Micro Swift 1/3 "600TVL FPV camera 2.3mm lens CCD camera
1 x 5.8G 25mW-200mW 48CH  VTX
2 x 11.1V 350mAh 30C lipo battery (comes without charger)
1 x WS2812 LED Board
4 x 3*100mm nylon band
1 x 12mm*150mm magic band
2 x 15mm*50mm back to back with 3M rubber magic belt
1 x XT60 female plug to XT30 male plug converter


close
Comments
Post review

Feedback
/ Register
Your country:
Follow a few simple steps to place an order. Mouse over a picture for details.
Deleted items