DYMOND mini RX-powerswitch 5,0 A LiPo BEC


This product is not available anymore. May be you can find similiar products in the same category (please, follow the link above).

We do not remove such products from the catalogue because customer reviews on them may contain useful information.
DYMOND mini RX-powerswitch 5,0 A LiPo BEC

The DYMOND RX-powerswitch is an electronic switch with a powerful integrated BEC for use with two-cell LiPo battery packs.
The switch provides a low voltage control for the connected LiPo pack, that outputs a visual and audible signal as the battery pack gets empty.

Features:
    Linear BEC without any switching noise
    3-stage low voltage warning
    Extremely low power consumption in the off state (only 0.047 mA)

Specifications:
    Nominal input voltage: 7.4 V, 2-cell LiPo, max. 9 V
    Output voltage: 6 V
    Rated current: 5.0 A continuous current at then 5 V output voltage
    Dimensions: 30 x 10 x 12 mm
    Dimensions for mounting hole: 21 x 10 mm, 12 mm mounting depth
    Weight: 10 g

Low voltage warning:
    Below 7.0 V: Slow sound and flash frequency
    Below 6.6 V: Medium Speed sound and flash frequency
    Below 6.0 V: Rapid Tone and flash frequency


close
Comments
Post review

Feedback
/ Register
Your country:
Follow a few simple steps to place an order. Mouse over a picture for details.
Deleted items