Power Box Professional (new version)

This product is not available anymore. May be you can find similiar products in the same category (please, follow the link above).

We do not remove such products from the catalogue because customer reviews on them may contain useful information.
Power Box Professional (new version)

The PowerBox Professional is a modern power supply system which contains all the electronic components required for today's receivers, servos and models. Every component needed for a totally secure airborne power supply, including ICs, micro-controller and electronic circuits, is duplicated!

 This High-End power supply system features an outstanding range of the latest innovations, including a high-resolution graphic OLED screen, four match-channels catering for eight servos, and the facility to bind to the downlink channels of various manufacturers.

    High-resolution graphic OLED screen with 128 x 64 pixels
    Ultra-simple menu-based programming system using the Sensor-Switch Signal amplification for a total of eight channels and twelve servos
    Synchronised servo output: all servos operate totally synchronously
    16-bit processor for high-speed, high-resolution signal processing
    Four match-channels, each for two servos; all servos separately variable
    Double regulated output voltage
    Sockets for Multiplex MSB and Spektrum downlink bus systems, update capability with USB Interface Adapter for other systems
    Direct transmission of both battery voltage values to the transmitter
    Voltage display for each battery separately
    Servo voltages can be set to 5.9 V or 7.4 V
    Minimum value memory displays any voltage collapses
    Combined heat-sinks permit high regulator power
    Voltage regulator monitor
    Supports four battery types: LiPo, LiFePo, NiMH, NiCd
    Suppression of any servo feedback currents which may occur
    Can also be switched on and off using the MagSensor Update-capable using the PowerBox USB Interface Adapter

    Operating voltage: 4,0V - 9,0V
    Power supply: 2 x 5s NiMH/NiCd, 2s LiPo, 2s LiFePo
    Current drain: approx. 130mA
    Idle current: approx. 15µA
    Output voltage: 5,9V or 7,4V stabilised
    Max. load current: Peak 2x20A
    Dropout voltage: 0,3V
    Receiver: 1 via parallel inputs
    Supported telemetry systems: DSM2/DSMX, M-Link
    Channels: 8, 4 of them programmable
    Servo outputs: 12, 8 of them programmable
    Servo signal resolution: 0,5µs
    Selectable signal frame rates: 9ms, 12ms, 15ms, 18ms, 21ms
    Integral screen: OLED graphic panel 128x64 pixels
    Dimensions: 110x72x24
    Weight incl. switch: 130g
    Temperature range: -30°C to +75°C
    EMV approval: EN 55014-1:2006
    CE: 2004/108/EG

Post review

/ Register
Your country:
Follow a few simple steps to place an order. Mouse over a picture for details.
Deleted items