Finish-Cure 20 Min Epoxy Glue 4.5 oz


Price: $11.58
Bonus: 12
Reviews: 0
Supplier's rating
In Stock
Shipping weight: 188 g
Similiar products Supplier In Stock Price / Weight Bonus points per product Add To Cart / Wishlist
Finish-Cure 20 Min Epoxy Glue 4.5 oz Finish-Cure 20 Min Epoxy Glue 4.5 oz Europe HobbyKing Out Of Stock $12.81
188 g
Bonus: 13

Finish-Cure 20 Min Epoxy 4.5 oz
FINISH-CURE 20 min. epoxy is an excellent, low odor substitute for polyester resins. It can be used for applying fiberglass cloth to wood or by itself to give wood a surface ready for primer and paint. FINISH-CURE can be sanded the easiest of all our epoxies and is excellent for the sheeting of foam core wings. Allow 8 hours for full curing. For best results, FINISH-CURE should be heated to a temperature above 85 degrees F or applying light weight fiberglass, lay cloth on balsa first, then brush on FINISH-CURE. When fully saturated, go over the surface with a heat gun, and then squeegee off excess epoxy with a playing card from an old deck. Heat and remove excess several times for a light weight finish. If room temperature is below 70 degrees F use a heat gun on the surface several times for the next 2 hours. When dry, lightly sand, then fill surface with a low weight spakeling compound, scrapping off excess with a playing card. Sand to a smooth finish ready for primer. For heavy weight fiberglass, apply the epoxy before and after laying down the cloth. FINISH-CURE is best mixed in a disposable cup.


close
Comments
Post review

Feedback
/ Register
Your country:
Follow a few simple steps to place an order. Mouse over a picture for details.
Deleted items